Home > Product Models > Neware Battery Tester For Pouch Cell Test

Neware Battery Tester For Pouch Cell Test
  • Product introduction
  • Technology and function
  • Service and warranty



  • Model:BTS5V6A
    Current Rise Time:1mS
    Input Impedance:>1M Ohm
    Measurement Resolution:16 bit
    Testing Data Output:PDF;Excel
    Connection for PC:TCP/IP(Ethernet)
    One rack can hold 80 channels
    Channel Control Mode:Independent Control

     
     
    Neware offers BTS5V6A Battery Tester for cylindrical cell and pouch cell capacity Testing.It based on charging discharging battery under different modes. It controlled by the Monitor Software installed at computer. Monitor software to edit testing program and BTSDA to analysis tested data.
     
    Each of unit BTS5V6A has 8 channels and could be installed Max.10 units on a rack make up 80 channels. Each of channel could be controlled independently that user could charge discharge batteries with different testing programs freedom.Both voltage and current testing accuracy is 0.05%.Include three-current range,it reaction the truest situation of battery charge and discharge.
     
    BTS5V6A widely accepted by Lab and battery manufactures for production line testing battery capacity,cycle life,DCIR.It is suitable to test lithium ion batteries,NiMH batteries,Nickel batteries,capacitors and super-capacitors.

     

    Primary Applications:
     

    • Pouch Cell Testing
    • Mobile Battery Testing
    • Cylindrical Cell Testing
    • Production Line Testing
    • Super-capacitor Testing
    • Lab Battery Materials Research






  • Key Technology Parameters:
     
    Voltage Range:-5V~5V
    Lowest Discharge Voltage:1.0V
    Voltage Testing Precision:±0.05%
     
    Dual-current Range:
    Range1:0.5mA~100mA;
    Range2:100mA~6A
    Current Testing Precision:±0.05%
     
    Charge Mode:Constant Current Charge、Constant Voltage Charge、Constant Current Constant Voltage Charge、Constant Power Charge;
    Discharge Model:Constant Current Discharge、Constant Voltage Discharge、Constant Power Discharge、Constant Resistance Discharge;

     
     
    Key Features:
     
    • DCIR Testing
    • Pulse Testing
    • Capacity Testing
    • Cycle Life Testing
    • Testing Data Analysis
    • Charge/Discharge Testing
     
     
    Safety:
     
    • Neware Monitor Software has the function that user can set current、voltage、capacity、temperature etc. Parameters,this will help user avoid over charging,over discharging and over heating during charging discharging coin cell in a test program.
    • At Monitor Software,user could fill “Creator” 、“Remarks” and backup testing data before starting a testing program.This will hope protect battery testing data.
    • Neware battery tester utilizes LAN as the main framework to transfer data. This provides the most flexibility and reliablity to your system deployment.When you look down into Neware batter, its unique Middle Machine architecture provides another enhancement layer to the data security issue. Moreover, this MM is an embedded system that allows you run tests even your LAN is down.
    • All Neware Battery Tester are internet version,user could monitor button cell testing progress running in Lab at anywhere have internet.
    • Neware battery Tester hardware has the function of Anti-reverse connection,in case user connect battery anode to Battery Tester cathode.






  • Our Advantages:
     
    • All kinds of types are manufactured for a range of current from 1mA to 1000A,a range of voltage from 5V to 100V to meet customers' special needs.We also provide the BTS  which can test the voltage of 0 V or even  lower. 
    • Reasonable Price, standard and Reliable Product.
    • Improve the quality and life expectancy of your products.
    • Work Performance more effective and efficacy.
     
      
    Warranty and Customer Service:
     
    Neware warrants its equipment for 1 year from shipment, to be free from defection workmanship and material.For some other consumptive materials,as battery clamps,we provide a 3-month warranty.This warranty,including customer service support and software licenses is not transferable.Meanwhile,we provide lifetime software update service to help your equipment optimized in its best  status.
     

    We provide much more customer services:
     
    • Battery Testing Service
    • Free Technical Training
    • BTS Calibration Service
    • Free Service Call Service
     
     
    Warranty Terms:
     
    • Neware warrants that the hardware equipment will be free from defects in workmanship and material, for a period of one (1) year following delivery. For some other consumptive materials,like battery clamps,we provide a 3 month warranty.
    • Neware shall NOT be held liable or assume any responsibility for products damaged by improper handling or installation.This warranty is limited to the repair replacement of the defective unit. 
    • Returned units are tested and repaired or replaced from a stock of factory reconditioned units. Any units that are determined to be “No Trouble Found” (NTF) shall be returned. 


    We provide the following customer services:
     
    Free technical training
     
    Our technical service engineering team is always available for service call. We provide sufficient pre-sales and after-sales services.
     
    Free software upgrade
     
    We provide lifetime software update service to help your equipment get the best result as it can.
     
    Online technical support
     
    You can always visit our website (www.newaredevice.com) for the latestproducts information, latest version of software,online chatting with  us,and dropping emails to us directly.




Battery Capacity Test:Capacity is one of the most im portant indexes of a battery,but estimating it on the fly is complex.The traditional charge discharge charge cycle is still the most reliable method to measure battery capacity.Battery capacity is time and current accumulation.Measure battery capacity different battery manufacture have their own methods. Generally, discharge capacity is usually tested at a low current (0.2C). Meantime, set charge rate at 0.5C to test charge capacity.
Neware Battery Cycler has the function of doing charge discharge cycle up to 65535 times to test battery capacity. Through Neware BTSDA,user could analysis test data of charge discharge cycle to know the reason which cause battery at the capacity.

Battery Cycle Life Test:Life is another one of the most important indexes of a battery.Take Lithium-ion battery for example,the lithium-ion battery works on ion movement between the positive and negative electrodes,with increase charge discharge cycles,internal resistance,elevated temperature and aging decrease the movement and in turn putting an end to the battery life.Battery manufacturers take a conservative approach and specify the life of battery most consumer products as being 300 to 500 charge discharge cycles. IEC for a standard lithium-ion battery that the remain capacity after 500 charge discharge cycles must be 60% or more.Battery life cycle number is influenced by charge/discharge rate,working temperature, environment and other factors.
 NEWARE battery testing equipment support 65535 cycles to test (one charge+one discharge considered one cycle)battery cycle life with high precision and 365 days Uninterrupted work.

 

Product Models