Home > Product Models > > Neware Battery Tester For Bean Cell and Mini Pouch Cell Test

Neware Battery Tester For Bean Cell and Mini Pouch Cell Test
  • Product introduction
  • Technology and function
  • Service and warranty

  • Model:BTS5V600mA8CH
    Current Rise Time:1mS
    Input Impedance:>1M Ohm
    Measurement Resolution:24 bit
    Testing Data Output:PDF;Excel
    Connection for PC:TCP/IP(Ethernet)
    One rack can hold 88 channels
    Channel Control Mode:Independent Control

    BTS5V600mA Battery Tester widely used to test mini pouch cells and bean cells which used on bluetooth earphone and others electric tools.BTS5V600mA has 8 channels per unit,Neware offer rack to hold BTS5V600mA,one rack can hold Max.11 units BTS5V600mA.

    Neware Battery Test Equipment released the BTS5V600mA  to market in 2019 which ultra-high testing precision 
    battery test equipment.Each channel of BTS5V600mA could be controlled independently for testing pouch cells and polymer batteries.It has three current range under 0.05% testing precision measurement,fast data sampling and quickly current reponse.All Neware battery test system is controlled by the software installed at computer for real-time data monitoring and tested data could be analyzed by BTSDA.

    BTS5V600mA could be used both at Lab and battery manufactures for production line testing battery capacity,cycle life,DCIR.It is suitable to test lithium ion batteries,NiMH batteries,Nickel batteries,capacitors and super-capacitors.

    Primary Applications:

    • Bean Cell Testing
    • Pouch Cell Testing
    • 3C Batteries Testing
    • Mobile Battery Testing
    • Production Line Testing
    • Super-capacitor Testing
    • Lab Battery Materials Research

  • Key Technology Parameters:
    Voltage Range:-5V~5V
    Lowest Discharge Voltage:0.5V
    Voltage Testing Precision:±0.05%
    Three-current Range:
    Range 1:0.5mA~100mA;
    Range 2:100mA~300mA
    Range 3:300mA~600mA;

    Current Testing Precision:±0.05%
    Charge Mode:Constant Current Charge、Constant Voltage Charge、Constant Current Constant Voltage Charge、Constant Power Charge;
    Discharge Model:Constant Current Discharge、Constant Voltage Discharge、Constant Power Discharge、Constant Resistance Discharge;

    Key Features:
    • DCIR Testing
    • Pulse Testing
    • Capacity Testing
    • Cycle Life Testing
    • Testing Data Analysis
    • Charge/Discharge Testing
    • Neware battery test equipment Monitor Software has the function that user can set current、voltage、capacity、temperature etc. Parameters,this will help user avoid over charging,over discharging and over heating during charging discharging coin cell in a test program.
    • At Monitor Software,user could fill “Creator” 、“Remarks” and backup testing data before starting a testing program.This will hope protect battery testing data.
    • Neware battery test equipment utilizes LAN as the main framework to transfer data. This provides the most flexibility and reliablity to your system deployment.When you look down into Neware batter, its unique Middle Machine architecture provides another enhancement layer to the data security issue. Moreover, this MM is an embedded system that allows you run tests even your LAN is down.
    • All Neware Battery Tester are internet version,user could monitor button cell testing progress running in Lab at anywhere have internet.
    • Neware battery test equipment hardware has the function of Anti-reverse connection,in case user connect battery anode to Battery Tester cathode.

  • Our Advantages:
    • All kinds of types are manufactured for a range of current from 1mA to 1000A,a range of voltage from 5V to 100V to meet customers' special need.We also provide the BTS  which can test the voltage of 0 V or even  lower. 
    • Reasonable Price, standard and Reliable Product.
    • Improve the quality and life expectancy of your products.
    • Work Performance more effective and efficacy.
    Warranty and Customer Service:

    Neware warrants its equipment for 1 year from shipment,to be free from defection workmanship and material.For some other consumptive materials,  as battery clamps,we provide a 3-month warranty.This warranty, including customer service support and software licenses is not transferable. Meanwhile,we provide lifetime software update service to help your  equipment optimized in its best  status.

    We provide much more customer services:
    • Battery Testing Service
    • Free Technical Training
    • BTS Calibration Service
    • Free Service Call Service
    Warranty Terms:
    • Neware warrants that the hardware equipment will be free from defects in workmanship and material, for a period of one (1) year following delivery. For some other consumptive materials,like battery clamps,we provide a 3 month warranty.
    • Neware shall NOT be held liable or assume any responsibility for products damaged by improper handling or installation.This warranty is limited to the repair replacement of the defective unit. 
    • Returned units are tested and repaired or replaced from a stock of factory reconditioned units. Any units that are determined to be “No Trouble Found” (NTF) shall be returned. 

    We provide the following customer services:
    Free technical training
    Our technical service engineering team is always available for service call. We provide sufficient pre-sales and after-sales services.
    Free software upgrade
    We provide lifetime software update service to help your equipment get the best result as it can.
    Online technical support
    You can always visit our website (www.newaredevice.com) for the latestproducts information, latest version of software,online chatting with  us,and dropping emails to us directly.


Driving Simulation Test:“Drive Simulation Test” is used to assess the performance of EV-used batteries in actual on-road driving conditions.We all know that electric vehicles are powered by batteries. User behavior while driving electric vehicles, however, such as starting the car, pressing the accelerator and hitting the brake (regenerative braking) highly affects battery performance, and even its cycle life. Therefore, the United States Advanced Battery Consortium (USABC) has made corresponding regulations and forced EV batteries to pass the Variable Power Discharge Test before they are released to the market.

The fundamental requirement is a stable output voltage which can be controlled with high dynamism and precision even with rapid load changes. The Neware BTS8000 series battery test system meets this requirement by using complex and flexible digital control algorithms, implemented with DSP and FPGA structures, as well as fast-cycled power semiconductors.
To test hybrid or all-electric drive systems, real batteries or a battery simulator can be used as the energy source. If reproducible results are needed, the battery simulator is the better choice since the properties of a battery can be determined by a range of parameters.

Battery Capacity Test:Capacity is one of the most important indexes of a battery, but estimating it on the fly is complex. The traditional charge/discharge/charge cycle is still the most dependable method to measure capacity.Battery capacity is time and current accumulation.Measure battery capacity different battery manufacture has their own method.Generally, discharge capacity is usually tested at a low current (0.2C). Meanwhile, set charge rate at 0.5C to test charge capacity.

Neware Battery Cycler has the function of doing charge discharge cycle up to 65535 times to test batteries capacity. Through Neware BTSDA,user could analysis testing data of charge discharge cycle to know the reason which cause battery at the capacity.