Neware Battery Test System For Driving Simulation Test
Current Rise Time:10mS
Input Impedance:＞1M Ohm
Measurement Resolution:16 bit
Testing Data Output:PDF;Excel
Connection for PC:TCP/IP(Ethernet)
Channel Control Mode:Independent Control
BTS5V100A Neware Battery Test System is industrial scale testing machine,it isd used to test test moudle,pack batteries which made up by many single cells in parallel.It has eight channels and sixteen channels per unit these two models,each of channel is independent and could do different charging discharging task at the same time.
As BTS5V100A Battery Test System has high testing accuracy,multi-current test range,stable function and speed data record frequency,so BTS5V100A could be used to do driving simulation testing,HPPC testing,DCIR testing and Pulse testing.
Neware battery test system is controlled by the software,user could edit charging discharging step here.The client software has the function of “jump”,during battery testing,if user want to quit current step and start from another step,”jump” function could achieve.It also have “continue” function too.When battery tester is running and user need leave,they have to stop testing.But once user back,they need continue testing,”continue” function could achieve the purpose and continue to test start from any step user select.
After battery testing,Neware offer BTSDA software to analyze testing data,the whole testing process is under Neware client software monitoring.
- Pack Battery Testing
- Super-capacitor Testing
- Cylindrical Batteries Testing
- Laboratory Research Testing
Key Technology Parameters:
Lowest Discharge Voltage:2V
Voltage Testing Precision:±0.05%
Current Testing Precision:±0.05%
Charge Mode:Constant Current Charge、Constant Voltage Charge、Constant Current Constant Voltage Charge、Constant Power Charge;
Discharge Model:Constant Current Discharge、Constant Voltage Discharge、Constant Power Discharge、Constant Resistance Discharge;
Pulse Test Mode:Constant Current Charge、Constant Power Charge;Constant Current Discharge、Constant Power Discharge
- SIM Testing
- HPPC Testing
- Battery DCIR Testing
- Battery Pulse Testing
- Testing Data Analysis
- Battery Cycle Life Testing
- Battery Driving Simulation Testing
- Battery Charge/Discharge Testing
- Neware Battery Test System Monitor Software has the function that user can set current、voltage、capacity、temperature etc. Parameters,this will help user avoid over charging,over discharging and over heating during charging discharging coin cell in a test program.
- At Monitor Software,user could fill “Creator” 、“Remarks” and backup testing data before starting a testing program.This will hope protect battery testing data.
- Neware battery tester utilizes LAN as the main framework to transfer data. This provides the most flexibility and reliablity to your system deployment.When you look down into Neware batter, its unique Middle Machine architecture provides another enhancement layer to the data security issue. Moreover, this MM is an embedded system that allows you run tests even your LAN is down.
- All Neware Battery Tester are internet version,user could monitor button cell testing progress running in Lab at anywhere have internet.
- Neware battery Tester hardware has the function of Anti-reverse connection,in case user connect battery anode to Battery Tester cathode.
Neware warrants its equipment for 1 year from shipment,to be free from defection workmanship and material.For some other consumptive materials, as battery clamps,we provide a 3-month warranty.This warranty, including customer service support and software licenses is not transferable. Meanwhile,we provide lifetime software update service to help your equipment optimized in its best status.
Driving Simulation Test:“Drive Simulation Test” is used to assess the performance of EV-used batteries in actual on-road driving conditions.We all know that electric vehicles are powered by batteries. User behavior while driving electric vehicles, however, such as starting the car, pressing the accelerator and hitting the brake (regenerative braking) highly affects battery performance, and even its cycle life. Therefore, the United States Advanced Battery Consortium (USABC) has made corresponding regulations and forced EV batteries to pass the Variable Power Discharge Test before they are released to the market.
The fundamental requirement is a stable output voltage which can be controlled with high dynamism and precision even with rapid load changes. The Neware BTS8000 series battery test system meets this requirement by using complex and flexible digital control algorithms, implemented with DSP and FPGA structures, as well as fast-cycled power semiconductors.
Battery Capacity Test:Capacity is one of the most important indexes of a battery, but estimating it on the fly is complex. The traditional charge/discharge/charge cycle is still the most dependable method to measure capacity.Battery capacity is time and current accumulation.Measure battery capacity different battery manufacture has their own method.Generally, discharge capacity is usually tested at a low current (0.2C). Meanwhile, set charge rate at 0.5C to test charge capacity.
Neware Battery Cycler has the function of doing charge discharge cycle up to 65535 times to test batteries capacity. Through Neware BTSDA,user could analysis testing data of charge discharge cycle to know the reason which cause battery at the capacity.